GENUINE AEM 30-3300 Water Methanol Injection Kit 1 Gallon Tank V2 with MAP Sensor

Fuel Injector Plugs & Adapters. Fuel Pump - 255LPH HIGH FLOW.

Fuel Pump - 255LPH WALBRO. Fuel Pump - 340LPH 65mm QUANTU.

Fuel Pump - 340LPH E85 QUANTUM. Fuel Pump - 340LPH QUANTUM. Fuel Pump - 350-525LPH WALBRO. Fuel Pump - AJP MOTOS. Fuel Pump - Arctic Cat ATV.

Fuel Pump - Automotive OEM. Fuel Pump - BMW Motorcycle. Fuel Pump - Cannondale ATV.

Fuel Pump - Hardwire Kit. Fuel Pump - Harley Davidson. Fuel Pump - Indian Motorcycle. Fuel Pump - Inline / External. Fuel Pump - John Deere.

Fuel Pump - KTM & HUSQVARNA. Fuel Pump - Land Rover. Fuel Pump - Machinery/ Tractor. Fuel Pump - Moto Guzzi.

Fuel Pump - MV Agusta. Fuel Pump - POLARIS ATV. Fuel Pump - TM Racing. Fuel Pump - VESPA / PIAGGIO.

Fuel Pump - Yamaha ATV. Fuel Pump - Yamaha Marine. GENUINE AEM 30-3300 Water Methanol Injection Kit 1 Gallon Tank V2 w/ MAP Sensor. NEW GENUINE AEM 30-3300 V2 WATER METHANOL KIT. DESIGNED, TESTED, AND MANUFACTURED IN THE USA!

SEALED IN FACTORY AEM PACKAGE. THE AEM WATER/METHANOL INJECTION SYSTEM ADVANTAGE: Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing'without using high-octane racing fuel'for power gains of up to 20%. AEM's Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system. AEM offers two different water/methanol controller designs for gas vehicles.

One is boost dependent for forced induction vehicles up to 35 PSI of boost (kit PN 30-3300). The second controller (Kit PN 30-3350) features a multiple input design that enables users to install AEM's Water/Methanol Injection Kit on ultra-high boost vehicles (above 35 PSI) using a 0-5v voltage-based external MAP sensor. Robust, Easy to Use Controller Designs The new controller designs (Boost Dependent Kit PN 30-3300 & Multi Input Kit PN 30-3350) feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness's positive-lock connector.

The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. Both controller housings feature an easy to access integrated fuse and molded mounting tabs. AEM's Water/Methanol Injection kit's wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation.

Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive. Integrated Boost Safe Feature The controllers in AEM's Water Methanol systems include an integrated Boost Safe output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.

, allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, Boost Safe can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water/Methanol Injection Systems. Heavy-Duty High Pressure Injection Pump AEM's internally-bypassed water/methanol injection pump does not cycle on and off and provides quiet, smooth operation.

AEM's gas Water/Methanol Injection Systems are available with or without a compact 1 gallon tank. A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris.

Machined Billet Injectors and Nozzles AEM includes one precision-machined billet injector in its gasoline Water/Methanol Injection kit. It features an integral check valve to prevent unintended fluid flow.

Three billet injector nozzles are included for matching water/methanol flow to an engine's horsepower output. Fuel Performance is an Online Webshop that continues to grow from strength to strength on a number of platforms. What are we known for? We offer unbeatable pricing on a continuously growing list of the biggest name brand performance parts in the world. In addition, we pride ourselves on providing specialized fitment kits to all parts wherever possible.

We specialize in Fuel Pump Kits for Automotive, Automotive Performance, Motorcycles, Scooters, ATV, UTV, Tractors, Jetski's, Watercraft, Marine and Snowmobiles! Fuel Performance Limited is an Online Webshop that continues to grow from strength to strength. In addition, we pride ourselves on providing specialised fitment kits to all parts wherever possible.

We specialise in Fuel Pump Kits for Automotive, Automotive Performance, Motorcycles, Scooters, ATV, UTV, Tractors, Jetski's, Watercraft, Marine and Snowmobiles! We operate globally and have Offices, Resellers, Distributors & Warehouses worldwide.

Please be aware that under no circumstances will FUEL PERFORMANCE LTD be held responsible for any labour or repair costs or any other costs incurred from parts found to be faulty, defective or incorrect or any other costs arising from parts supplied. It is your responsibility to make sure you are purchasing the correct item. If you receive your order and find something is missing or damaged you are to make contact with us within 24 hours of receiving your order. GENUINE AEM V2 Water/Methanol Injection Nozzle & Jet Kit, 30-3312 30-3315. NEW AEM Flex Fuel ETHANOL Content Sensors - 6AN Fittings # 30-2201 ETHANOL E85.

NEW AEM Flex Fuel ETHANOL Content Sensors - 3/8 Barb # 30-2200 E85. GENUINE AEM Water Temperature Temp Sensor Kit 1/8 NPT 30-2012. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item "GENUINE AEM 30-3300 Water Methanol Injection Kit 1 Gallon Tank V2 with MAP Sensor" is in sale since Sunday, November 22, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Other".

The seller is "fuel-performanceusa" and is located in Ventura, California. This item can be shipped worldwide.

Country/Region of Manufacture: United States
Manufacturer Part Number: 30-3300
Brand: AEM
Fitment Type: Performance/Custom
Warranty: Yes